« Back to product information

Corral-Cooler Complete Cooling System
#BRA70
Buy One For: $99.95

5 EASY STEPS to Fast and Easy Installation!

1. Attach the 3/4" Automatic Drain Valve, the Poly-Phosphate Filter and 3/4" to 3/8" Adapter to your faucet as shown. Unroll the 50' coil of 3/8" hose. The hose should be inserted about 1" into the adapter using a combination of twisting and pushing motion. Cut hose to desired length to reach the first Misting Tee, Compression Tee, or Elbow.

Note: Kit comes with a bonus "Y" Connector not shown in image 1 so you can still use your facet.

2. Push and twist the hose about 1/2" into ends of the compression Tees, Elbows, Couplers and Misting Tees as shown. Install the Misting Elbow at the end of the system. The recommended distance between misting nozzles is 2-3 feet (nineteen 2' lengths of 3/8" hose is supplied in the kit.

3. Turn on the water to flush out the system before installing Misting Nozzles.

4. Nail Mounting Clamps close to the Nozzles Tees and Elbows. (Use protective eyewear)

5. Install the Misting Nozzles. Make sure the "O" ring is properly seated. Hand tighten. Rotate Misting Nozzles to desired angle. (A 45° angle toward the ground is recommended.) TURN ON AND ENJOY!