« Back to product information

Corral-Cooler Complete Cooling System
#BRA70
Buy One For: $99.95

This Kit's special misting nozzles introduce a micro-fine mist into the air which naturally repels flying insects without the use of harmful insecticides or poisons. Because the micro-fine mist of water flash-evaporates you need not worry about having a wet barn or stalls. Turning on your Corral Cooler also makes dust, smoke and any other airborne partials a thing of the past.

Complete do-it-yourself kit
Easily attaches to any wall, fence, or barn. Special compression fittings mean you get a quick and leak-proof installation in minutes. Simply hand-rotate nozzles to adjust direction of mist. Kit is designed to be configured in any number of ways to best cool and clean the air in and around your stable. This powerful system can also be used to bring relief to your paddocks and training areas. Manufactured in the USA with a 1-year manufacturer's warranty against defects and workmanship.

Installation is no-fuss.
Use 2 to 3 misting nozzles per stall spaced 2' apart along areas where air normally blows into your horse's stall and additional misting nozzles should be spaced 2' apart along all other doors and windows. If you are using fans to blow into your horse's stall then the misting nozzles should be placed in front of the fan. Each Corral-Cooler kit comes with materials to complete a typical installation in an average four-stall barn. For best results mount misting nozzles at locations where air will be moving into the area you are cooling. Misting nozzles should be used along the perimeter of your barn so that air will be cooled as it passes through the mist and into your barn. To add to the cooling effect you may add a supporting set of misting nozzles at the center of your barn to cool air as it passes through. Additional expansion parts can be purchased for larger barns, paddocks, or training arenas. System is easily expanded and customized to cool any areas in or around your farm or ranch.

Misting Kit includes:
88' of 3/8" poly hose (maximum 125 PSI rated, minimum of 45 PSI needed), 1 - Poly-phosphate filter, 1 - Convenient "Y" connector with dual shutoffs (so you can continue to use your hydrant without disconnecting your cooling system), 1 - 3/4" automatic drain valve, 1 - Hose thread to 3/8" poly hose adaptor, 50 - Mounting clamps, 4 - Nozzle plugs, 20 - Mister tees with Brass misting nozzles, 4 - Misting Elbows with Brass misting nozzles, 4 - Compression tees, 4 - Compression elbows, 4 - Compression couplers, 1 - 3/4" FHT x 3/8" adaptor.